Navid Sokhandani, Omid Bavi, Seyed Mojtaba Zebarjad, Ali Reza Setoodeh, "Structure-Property Correlations in Graphene-Based Epoxy Nanocomposites and Their Impact on Tribological Performance", JOURNAL OF APPLIED POLYMER SCIENCE, vol. 143, 2026

Navid Sokhandani, Omid Bavi, SeyedMojtaba Zebarjad, Ali Reza Setoodeh, "Experimental investigation and semi-empirical modeling of mechanical behavior in Gr, GO, and rGO nanocomposites", Results in Engineering, vol. 26, 2025

Homan Esfandiyari, Ali Reza Setoodeh, Hamed Farahmand, Hamed Badjian, Greg Wheatley, "Studying the influences of mono-vacancy defect and strain rate on the unusual tensile behavior of phosphorene NTs", Advances in Nano Research, vol. 15, 2023

Navid Sokhandani, Ali Reza Setoodeh, Seyed Mojtaba Zebarjad, Kamran Nikbin, Greg Wheatley, "The influence of nano-silica on the wear and mechanical performance of vinyl-ester/glass fiber nanocomposites", Advances in Nano Research, vol. 13, 2022

, Ali Reza Setoodeh, A.P. Vassilopoulos, "Isogeometric Kirchhoff-Love shell patches in free and forced vibration of sinusoidally corrugated FG carbon nanotube-reinforced composite panels", THIN-WALLED STRUCTURES, vol. 171, 2022

Ehsan Selahi, Ali Reza Setoodeh, Masoud Tahani, "Failure analysis of fiberglass-vinyl ester composite cylinders subjected to fire and asymmetric transient pressure", POLYMER COMPOSITES, vol. 42, 2021

, Ali Reza Setoodeh, Alan Kin-Tak Lau, "Mechanical and electromagnetic behavior of fabricated hybrid composite sandwich radome with a new optimized frequency-selective surface", COMPOSITE STRUCTURES, vol. 273, 2021

Hamed Badjian, Ali Reza Setoodeh, Omid Bavi, Timon Rabczuk, "Enhanced mechanical properties of epoxy-based nanocomposites reinforced with functionalized carbon nanobuds", APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING, vol. 127, 2021

Hamed Badjian, Ali Reza Setoodeh, Manouchehr Salehi, Omid Bavi, "MICRO/MACROMECHANICAL ANALYSIS AND OPTIMIZATION OF THE FLEXURAL STRENGTH OF LaRC-SI/PmPV/CNT NANOCOMPOSITE SQUARE PLATE USING GENETIC ALGORITHM", Composites: Mechanics, Computations, Applications, vol. 12, 2021

Ehsan Ansari, Ali Reza Setoodeh, T. Rabczuk, "Isogeometric-stepwise vibrational behavior of rotating functionally graded blades with variable thickness at an arbitrary stagger angle subjected to thermal environment", COMPOSITE STRUCTURES, vol. 244, 2020

Ehsan Ansari, Ali Reza Setoodeh, "Applying isogeometric approach for free vibration, mechanical, and thermal buckling analyses of functionally graded variable-thickness blades", JOURNAL OF VIBRATION AND CONTROL, vol. 26, 2020

Hassan Shirzadi Jahromi, Ali Reza Setoodeh, "Longitudinal, Transverse, and Torsional Free Vibrational and Mechanical Behavior of Silicon Nanotubes Using an Atomistic Model", Materials Research-Ibero-american Journal of Materials, vol. 23, 2020

Hamed Shafiei, Ali Reza Setoodeh, "An analytical study on the nonlinear forced vibration of functionally graded carbon nanotube-reinforced composite beams on nonlinear viscoelastic foundation", ARCHIVES OF MECHANICS, vol. 72, 2020

, Ali Reza Setoodeh, "FSDT-Based Isogeometric Analysis for Free Vibration Behavior of Functionally Graded Skew Folded Plates", Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, vol. 44, 2020

Ali Reza Setoodeh, Mohammad Shojaee, P. Malekzadeh, "Vibrational behavior of doubly curved smart sandwich shells with FG-CNTRC face sheets and FG porous core", COMPOSITES PART B-ENGINEERING, vol. 165, 2019

P. Malekzadeh, Ali Reza Setoodeh, Mohammad Shojaee, "Vibration of FG-GPLs eccentric annular plates embedded in piezoelectric layers using a transformed differential quadrature method", COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, vol. 340, 2018

Ali Reza Setoodeh, Hamed Farahmand, "Nonlinear modeling of crystal system transition of black phosphorus using continuum-DFT model", JOURNAL OF PHYSICS-CONDENSED MATTER, vol. 30, 2018

Ali Reza Setoodeh, Hamed Farahmand, "Continuum-DFT multiscale model to investigate linear/nonlinear anisotropic mechanical characterization of crystal phase of nylon-6 6", MECHANICS OF MATERIALS, vol. 117, 2018

Ali Reza Setoodeh, Mohammad Shojaee, P. Malekzadeh, "Application of transformed differential quadrature to free vibration analysis of FG-CNTRC quadrilateral spherical panel with piezoelectric layers", COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, vol. 335, 2018

Ali Reza Setoodeh, Mohammad Rezaei, "An explicit solution for the size-dependent large amplitude transverse vibration of thin functionally graded micro-plates", Scientia Iranica, vol. 25, 2018

Ali Reza Setoodeh, Mohammad Shojaee, "Critical buckling load optimization of functionally graded carbon nanotube-reinforced laminated composite quadrilateral plates", POLYMER COMPOSITES, vol. 39, 2018

Hamed Shafiei, Ali Reza Setoodeh, "Buckling and Post-buckling Analysis of FG-CNTRC Beams: An Exact Closed Form Solution", Journal of Aerospace Science and Technology, vol. 11, 2017

Ali Reza Setoodeh, Navid Sokhandani, , "Improving Mechanical Properties of Kenaf/Polyester Composites Using Sodium Hydroxide Treatment and Fabricated by Vacuum Infusion Process", Journal of Engineering and Applied Sciences, vol. 12, 2017

Ali Reza Setoodeh, Navid Sokhandani, "Mechanical Properties Investigation of Glass/Fiber Reinforced Vinyl Ester/Clay Nanocomposites Fabricated by Vacuum Bag Molding", Journal of Engineering and Applied Sciences, vol. 12, 2017

Ali Reza Setoodeh, Hamed Badjian, "Mechanical behavior enhancement of defective graphene sheet employing boron nitride coating via atomistic study", Materials Research Express, vol. 4, 2017

Mohammad Shojaee, Ali Reza Setoodeh, P. Malekzadeh, "Vibration of functionally graded CNTs-reinforced skewed cylindrical panels using a transformed differential quadrature method", ACTA MECHANICA, vol. 228, 2017

Hamed Shafiei, Ali Reza Setoodeh, "Nonlinear free vibration and post-buckling of FG-CNTRC beams on nonlinear foundation", STEEL AND COMPOSITE STRUCTURES, vol. 24, 2017

Ali Reza Setoodeh, Hamed Badjian, Hassan Shirzadi Jahromi, "Atomistic study of mono/multi-atomic vacancy defects on the mechanical characterization of boron-doped graphene sheets", JOURNAL OF MOLECULAR MODELING, vol. 23, 2017

Hamed Badjian, Ali Reza Setoodeh, "Improved tensile and buckling behavior of defected carbon nanotubes utilizing boron nitride coating A molecular dynamic study", PHYSICA B-CONDENSED MATTER, vol. 507, 2017

Ali Reza Setoodeh, Mohammad Rezaei, "Large amplitude free vibration analysis of functionally graded nano/micro beams on nonlinear elastic foundation", STRUCTURAL ENGINEERING AND MECHANICS, vol. 61, 2017

Ali Reza Tavakolpour-Saleh, Ali Reza Setoodeh, Ehsan Ansari, "Iterative Learning Control of Two Coupled Nonlinear Spherical Tanks", World Academy of Science, Engineering and Technology, vol. 10, 2016

Ali Reza Setoodeh, Mohammad Shojaee, "Application of TW-DQ method to nonlinear free vibration analysis of FG carbon nanotube-reinforced composite quadrilateral plates", THIN-WALLED STRUCTURES, vol. 108, 2016

Ali Reza Setoodeh, Mohammad Rezaei, , "Linear and nonlinear torsional free vibration of functionally graded micro/nano-tubes based on modified couple stress theory", APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, vol. 37, 2016

Hamed Farahmand, Ali Reza Setoodeh, "A density functional approach to characterize anisotropic hyperelastic behavior of organic crystals Case study of nylon-6 6", COMPUTATIONAL MATERIALS SCIENCE, vol. 124, 2016

Ali Reza Tavakolpour-Saleh, Ali Reza Setoodeh, , "A Novel Multi-Component Strain-Gauge External Balance for Wind Tunnel Tests Simulation and Experiment", SENSORS AND ACTUATORS A-PHYSICAL, vol. 247, 2016

Ali Reza Setoodeh, , "Bending and Free Vibration Analyses of Rectangular Laminated Composite Plates Resting on Elastic Foundation Using a Refined Shear Deformation Theory", Iranian Journal of Materials Forming, vol. 2, 2015

Hossein Eslami, Fatemeh Mehdipour, Ali Reza Setoodeh, Seyed Jafar Rouzegar, "Nanoconfined polymers modelling and simulation approaches", MOLECULAR SIMULATION, vol. 41, 2015

Ali Reza Setoodeh, , N. Bavi, "DQ thermal buckling analysis of embedded curved carbon nanotubes based on nonlocal elasticity theory", Latin American Journal of Solids and Structures, vol. 12, 2015

Ali Reza Setoodeh, Salar Afrahim, "Nonlinear dynamic analysis of FG micro-pipes conveying fluid based on strain gradient theory", COMPOSITE STRUCTURES, vol. 116, 2014

E. Selahi, Ali Reza Setoodeh, M. Tahani, "Three-dimensional transient analysis of functionally graded truncated conical shells with variable thickness subjected to an asymmetric dynamic pressure", INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, vol. 119, 2014

M. Tahani, Ali Reza Setoodeh, E. Selahi, "Three-dimensional transient analysis of functionally graded cylindrical shells subjected to asymmetric dynamic pressure", SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, vol. 20, 2013

Ali Reza Setoodeh, M. Tahani, E. Selahi, "Transient dynamic and free vibration analysis of functionally graded truncated conical shells with non-uniform thickness subjected to mechanical shock loading", COMPOSITES PART B-ENGINEERING, vol. 43, 2012

Ali Reza Setoodeh, M. Ghorbanzadeh, P. Malekzadeh, "A two-dimensional free vibration analysis of functionally graded sandwich beams under thermal environment", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, vol. 226, 2012

Ali Reza Setoodeh, P. Malekzadeh, A. Vosoughi, "Nonlinear free vibration of orthotropic graphene sheets using nonlocal Mindlin plate theory", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, vol. 226, 2011